| Prefix |
Suffix |
Definition |
| . |
04 |
(INDUSTRIAL ONLY) COVER 2 NOTCHES LOOSER (2/12 TURN) |
| . |
05 |
(INDUSTRIAL ONLY) COVER 1 NOTCH LOOSER (1/12 TURN) |
| . |
06 |
(INDUSTRIAL ONLY) COVER 1 NOTCH TIGHTER (1/12 TURN) |
| . |
07 |
(INDUSTRIAL ONLY) COVER 2 NOTCHES TIGHTER (2/12 TURN) |
| . |
1 |
(AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE |
| . |
10 |
(INDUSTRIAL ONLY) 1/8 INCH PIPE PLUG IN GREASE HOLE |
| . |
10* |
(AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE , TWO LUBE FITTINGS, NAS516 KEYWAY OR KEY SLOT. |
| . |
11 |
(INDUSTRIAL ONLY) #1184 ALEMITE BUTTON HEAD FITTING 1/8 P.T. |
| . |
11* |
(AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, TFE-FIBERGLASS SEAL, NAS516 KEYWAY OR KEY SLOT. |
| . |
12 |
(INDUSTRIAL ONLY) #1461 ALEMITE STANDARD DOT FITTING 1/8 P.T. |
| . |
12* |
(AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT. |
| . |
13* |
(AIRCRAFT ONLY) PRELOADED INTERNAL FIT, TWO LUBE FITTINGS. |
| . |
14 |
(AIRCRAFT ONLY) PRELOADED INTERNAL FIT, TFE-FIBERGLASS SEALS. |
| . |
14 |
(INDUSTRIAL ONLY) #1831 ALERNITE GIANT BUTTON HEAD FITTING 1/8 P.T. |
| . |
15 |
(INDUSTRIAL ONLY) #1612 ALEMITE 65 DEGREE 1/8 P.T. |
| . |
15* |
(AIRCRAFT ONLY) PRELOADED INTERNAL FIT, NAS516 KEYWAY OR KEY SLOT. |
| . |
16 |
(INDUSTRIAL ONLY) A-336 ALEMITE 1/8 P.T. |
| . |
16* |
(AIRCRAFT ONLY) PRELOADED INTERNAL FIT, TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS. |
| . |
16A |
(INDUSTRIAL ONLY) M-336 ALEMITE 1/8 P.T. |
| . |
17 |
(INDUSTRIAL ONLY) #1688 ALEMITE 1/8 P.T. |
| . |
17* |
(AIRCRAFT ONLY) PRELOADED INTERNAL FIT, TWO LUBE FITTINGS, NAS516 KEYWAY OR KEY SLOT. |
| . |
18 |
(INDUSTRIAL ONLY) #1613-B ALEMITE 1/8 P.T. |
| . |
18* |
(AIRCRAFT ONLY) PRELOADED INTERNAL FIT, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT. |
| . |
19 |
(INDUSTRIAL ONLY) STAINLESS STEEL THREADED ROD, TAKE-UP UNITS |
| . |
19* |
ROD ENDS ONLY- (AIRCRAFT ONLY) PRELOADED INTERNAL FIT, TWO LUBE FITTINGS, TFE-F IBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOTS. |
| . |
2 |
(AIRCRAFT ONLY) ANNULAR BEARING (OTHER THAN TORQUE TUBE TYPE) PRELOADED TO 3 PERCENT -7 PERCENT OF RADIAL LIMIT LOAD RATING; ROD END BEARING PRELOADED TO 4 PERCENT - 8 PERCENT OF RADIAL LIMIT LOAD RATING. |
| . |
20 |
(INDUSTRIAL ONLY) 1/4 INCH PIPE PLUG IN GREASE HOLE |
| . |
20* |
ROD ENDS ONLY- (AIRCRAFT ONLY) TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS. |
| . |
21 |
(INDUSTRIAL ONLY) #1186 ALEMITE BUTTON HEAD FITTING 1/4 P.T.,** (USE -11) |
| . |
21* |
ROD ENDS ONLY- (AIRCRAFT ONLY) TWO LUBE FITTINGS, NAS516 KEYWAY OR KEY SLOT. |
| . |
22 |
(INDUSTRIAL ONLY) #14 89 ALEMITE MOGUL DOT FITTING 1/4 P.T. |
| . |
22* |
ROD ENDS ONLY- (AIRCRAFT ONLY) TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT. |
| . |
23 |
(INDUSTRIAL ONLY) #1823 ALEMITE GIANT BUTTON HEAD FITTING 1/4 P.T. |
| . |
23* |
ROD ENDS ONLY- (AIRCRAFT ONLY) TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT. |
| . |
24 |
(INDUSTRIAL ONLY) #45120 1/4 INCH TO 1/8 INCH REDUCER WITH 1613 ALEMITE 85 DEGREE ANGLE FITTING 1/8 P.T. |
| . |
24* |
ROD ENDS ONLY- (AIRCRAFT ONLY) NO LUBE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT. |
| . |
25 |
(AIRCRAFT ONLY) ONE ALEMITE 3019 LUBE FITTING, TFE-FIBERGLASS SEALS, NAS516 KEYWAY (APPLIED TO DM AND DMH ROD ENDS WITH EYE O.D. OVER 1.5 INCHES ONLY). |
| . |
25 |
(INDUSTRIAL ONLY) A359 ALEMITE, 1/4 PIPE TAP FITTING,** (USE -16). |
| . |
26 |
(INDUSTRIAL ONLY) 5410 LINCOLN OR 16133 ALEMITE FITTING |
| . |
26* |
ROD ENDS ONLY- (AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, NO GREASE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT. |
| . |
27 |
(INDUSTRIAL ONLY) NO GREASE FITTING |
| . |
27* |
ROD ENDS ONLY- (AIRCRAFT ONLY) THREADS PER KIL-S-8879. |
| . |
28 |
(INDUSTRIAL ONLY) #5099 LINCOLN FITTING, RELIEF TYPE |
| . |
28* |
ROD ENDS ONLY- (AIRCRAFT ONLY) THREADS ROLLED AFTER HEAT TREAT. |
| . |
29 |
(INDUSTRIAL ONLY) #1962 MONEL ALEMITE FITTING |
| . |
29* |
ROD ENDS ONLY- (AIRCRAFT ONLY) THREADS ROLLED AFTER HEAT TREAT, THREADS PER MIL-S-8879. |
| . |
3* |
(AIRCRAFT ONLY) TWO GREASE FITTINGS. |
| . |
30 |
(INDUSTRIAL ONLY) NORMAL DUTY UNIT ( 1 COLLAR OMITTED) |
| . |
30* |
ROD ENDS ONLY- (AIRCRAFT ONLY) NO GREASE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, THREADS ROLLED AFTER HEAT TREAT, THREADS PER MIL-S-8879. |
| . |
31 |
(INDUSTRIAL ONLY) HEAVY DUTY UNIT (COLLAR OMITTED ON HOUSING SIDE ONLY) |
| . |
31* |
ROD ENDS ONLY- (AIRCRAFT ONLY) NO GREASE FITTINGS, TFE-FIBERGLASS SEALS. |
| . |
32 |
(AIRCRAFT ONLY) TFE-FIBERGLASS SEALS, GREASE PER MIL-G-81322. |
| . |
32 |
(INDUSTRIAL ONLY) HEAVY DUTY UNIT (BOTH COLLARS OMITTED) |
| . |
33 |
(INDUSTRIAL ONLY) NO NAME PLATE |
| . |
33* |
ROD ENDS ONLY- ROD ENDS ONLY- (AIRCRAFT ONLY) NO GREASE FITTINGS, TFE-FIBERGLASS SEALS, GREASE PER MIL-G-81322. |
| . |
34 |
(INDUSTRIAL ONLY) PLAIN CARTON (IMPRINTED) |
| . |
34* |
ROD ENDS ONLY- (AIRCRAFT ONLY) TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, GREASE PER MIL-G-81322 |
| . |
35* |
ROD ENDS ONLY- (AIRCRAFT ONLY) TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, GREASE PER MIL-G-81322. |
| . |
36 |
(INDUSTRIAL ONLY) REVERSED COVER AND "M" SEAL ASSEMBLY, PERMATEX #2 ON THREADED COVER 0.D. |
| . |
36* |
ROD ENDS ONLY- (AIRCRAFT ONLY) NO GREASE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, GREASE PER MIL-G-81322. |
| . |
37 |
(INDUSTRIAL ONLY) (SPECIAL) (LAPPED BEARING) |
| . |
37* |
ROD ENDS ONLY- (AIRCRAFT ONLY) NO GREASE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, THREADS ROLLED AFTER HEAT TREAT, THREADS PER MIL-S-8879, GREASE PER MIL-G-81322. |
| . |
38 |
(INDUSTRIAL ONLY) TACONITE SEAL ARRANGEMENT IN AUXILIARY CAP WITH "M" SEAL. |
| . |
38* |
ROD ENDS ONLY- (AIRCRAFT ONLY) HO LUBE FITTINGS, TFE-FIBERGLASS SEALS, GREASE PER MIL-G-81322. |
| . |
39* |
ROD ENDS ONLY- (AIRCRAFT ONLY) TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, THREADS ROLLED AFTER HEAT TREAT, THREADS PER MIL-S-8879. |
| . |
4 |
(AIRCRAFT ONLY) TFE-FIBERGLASS SEAL. |
| . |
40 |
(INDUSTRIAL ONLY) NO LUBRICATION IN UNIT - RUST PREVENTATIVE ON BEARING |
| . |
40* |
ROD ENDS ONLY- (AIRCRAFT ONLY) TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, THREAD PER MIL-S-8879. |
| . |
400 TO 499 |
(AIRCRAFT ONLY) RESTRICTED USE FOR HIGH TEMPERATURE ENVIRONMENT ONLY. |
| . |
41 |
(AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, TFE-FIBERGLASS SEALS, GREASE PER MIL-G-81322. |
| . |
41 |
(INDUSTRIAL ONLY) LUBRICATED WITH DOW CORNING £41 |
| . |
42 |
(AIRCRAFT ONLY) GREASE PER MIL-G-81322. |
| . |
42 |
(INDUSTRIAL ONLY) LUBRICATED WITH SOCONY MOBIL BRB 14 |
| . |
43 |
(INDUSTRIAL ONLY) LUBRICATED WITH MOBIL TEMP #1 |
| . |
44 |
(INDUSTRIAL ONLY) LUBRICATED WITH LUBRIPLATE 630AA |
| . |
45 |
(INDUSTRIAL ONLY) LUBRICATED WITH SHELL ALVANIA #2 |
| . |
46 |
(INDUSTRIAL ONLY) 2/3 - 3/4 FILLED WITH LUBRICANT |
| . |
47 |
(INDUSTRIAL ONLY) LUBRICATED WITH LUBRIPLATE 630-2 |
| . |
48 |
(INDUSTRIAL ONLY) LUBRICATED WITH MOBILPLEX EP#2 |
| . |
49 |
(INDUSTRIAL ONLY) LUBRICATED WITH ENARCO NATEX GREASE £2 (NATIONAL REFINING CO.) |
| . |
5* |
(AIRCRAFT ONLY) NAS516 KEYWAY OR KEY SLOT. |
| . |
50 |
(INDUSTRIAL ONLY) LUBRICATED WITH MOBILPLEX EP#1 |
| . |
500 TO 599 |
(AIRCRAFT ONLY) RESERVE FOR NON-STANDARD VARIATIONS. |
| . |
51 |
(INDUSTRIAL ONLY) LUBRICATED WITH LUBRIPLATE 930-AA |
| . |
52 |
(INDUSTRIAL ONLY) LUBRICATED WITH LUBRIPLATE 930-A |
| . |
53 |
(INDUSTRIAL ONLY) LUBRICATED WITH MASTER LUBRICANTS M24M |
| . |
54 |
(INDUSTRIAL ONLY) LUBRICATED WITH AEROSHELL #14 |
| . |
55 |
(INDUSTRIAL ONLY) LUBRICATED WITH MARFAX #2 |
| . |
56 |
(INDUSTRIAL ONLY) LUBRICATED WITH MIL-G-23827 |
| . |
57 |
(INDUSTRIAL ONLY) LUBRICATED WITH KEYSTONE 89H |
| . |
58 |
(INDUSTRIAL ONLY) LUBRICATED WITH KEYSTONE 78 MEDIUM |
| . |
59 |
(INDUSTRIAL ONLY) LUBRICATED WITH PURE OIL CO. HTEP £2 |
| . |
6* |
(AIRCRAFT ONLY) REDUCED CLEARANCE, TWO LUBE FITTINGS |
| . |
60 |
(INDUSTRIAL ONLY) GARLOCK SEALS WITH BRASS CASE AND BERYLLIUM COPPER SPRINGS. |
| . |
61 |
(INDUSTRIAL ONLY) GARLOCK SEALS WITH STAINLESS STEEL CASE AND BERYLLIUM COPPER SPRINGS. |
| . |
67 |
(INDUSTRIAL ONLY) "M" WIPING SEAL - HOUSING SIDE ONLY, LIP OUT |
| . |
68 |
(INDUSTRIAL ONLY) "M" WIPING SEAL - COVER SIDE ONLY, LIP PUT |
| . |
69 |
(INDUSTRIAL ONLY) PRESS FIT BETWEEN HOUSING AND OUTER RACES - PROVIDED BY SMALLER BORE IN STANDARD HOUSING |
| . |
7 |
(AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, TFE-FIBERGLASS SEAL |
| . |
70 |
(INDUSTRIAL ONLY) MALLEABLE IRON HOUSING |
| . |
71 |
(INDUSTRIAL ONLY) Z METAL HOUSING. |
| . |
72 |
(INDUSTRIAL ONLY) CAST STEEL HOUSING |
| . |
73 |
(INDUSTRIAL ONLY) BRONZE HOUSING |
| . |
8* |
(AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, NAS516 KEYWAY OR KEY SLOT. |
| . |
80 |
(INDUSTRIAL ONLY) UNIT RETAPPED FOR 1/4 INCH PIPE AND EQUIPPED WITH STANDARD 21627-B ALEMITE FITTINGS |
| . |
81 |
(INDUSTRIAL ONLY) UNIT RETAPPED WITH 1/4 INCH PIPE TAP - DESIGNATE FITTING BY PROPER SUFFIX NUMBER (EXAMPLE: 2181: UNIT WITH 1/4 INCH P.T.. AND J1186 ALEMITE BUTTON HEAD FITTING) . |
| . |
82 |
(INDUSTRIAL ONLY) TFE-FABRIC LINED INNER RACE BORE |
| . |
84 |
(INDUSTRIAL ONLY) HEAVY DUTY BEARING WITH LIFEGARD SEALS |
| . |
85 |
(INDUSTRIAL ONLY) NORMAL DUTY BEARING WITH LIFEGARD SEALS |
| . |
88 |
(INDUSTRIAL ONLY) STANDARD NORMAL DUTY BEARING ASSEMBLY WITH "M" SEALS |
| . |
89 |
(INDUSTRIAL ONLY) STANDARD HEAVY DUTY BEARING ASSEMBLY WITH "M" SEALS |
| . |
9* |
(AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, TWO LUBE FITTINGS, TFE-FIBERGLASS SEAL. |
| . |
90 |
(INDUSTRIAL ONLY) ADAPTER BEARING ASSEMBLY, INCLUDING ADAPTER SLEEVE, LOCK-NUT AND LOCK-WASHER, WITH "M" SEALS. |
| . |
91 |
(INDUSTRIAL ONLY) STANDARD NORMAL DUTY BEARING ASSEMBLY ONLY |
| . |
92 |
(INDUSTRIAL ONLY) STANDARD NORMAL DUTY BEARING ASSEMBLY WITH " Z" SEALS |
| . |
93 |
(INDUSTRIAL ONLY) STANDARD NORMAL DUTY BEARING ASSEMBLY WITH "K" -SEALS |
| . |
94 |
(INDUSTRIAL ONLY) STANDARD HEAVY DUTY BEARING ASSEMBLY ONLY |
| . |
95 |
(INDUSTRIAL ONLY) STANDARD HEAVY DUTY BEARING ASSEMBLY WITH "Z" SEALS |
| . |
96 |
(INDUSTRIAL ONLY) STANDARD HEAVY DUTY BEARING ASSEMBLY WITH "K" SEALS |
| . |
97 |
(INDUSTRIAL ONLY) STANDARD ADAPTER BEARING ASSEMBLY INCLUDING ADAPTER SLEEVE LOCK-NUT AND LOCK-WASHER ONLY |
| . |
98 |
(INDUSTRIAL ONLY) STANDARD ADAPTER BEARING ASSEMBLY INCLUDING ADAPTER SLEEVE, LOCK-NUT AND LOCK -WASHER WTIH "Z" SEALS |
| . |
99 |
(INDUSTRIAL ONLY) STANDARD ADAPTER BEARING ASSEMBLY INCLUDING ADAPTER SLEEVE, LOCK-NUT AND LOCK-WASHER WITH "K" SEALS I |
| . |
A |
ONE OPEN AUXILIARY CAP SEAL INSTALLED ON COVER SIDE OF INDUSTRIAL ROLLER BEARING. |
| . |
AZ |
BEARING PRE-LUBRICATED WITH TEXACO 984, MIL-G-7421 GREASE,***. |
| . |
B |
ONE CLOSED AUXILIARY CAP SEAL INSTALLED ON COVER SIDE OF INDUSTRIAL ROLLER BEARING |
| . |
C |
CENTER GUIDE RING INSTALLED BETWEEN RETAINERS IN INDUSTRIAL ROLLER BEARINGS. |
| . |
E |
DOUBLE-ROW INDUSTRIAL ROLLER BEARING WITH ONE PIECE OUTER RING (CUP),*** |
| . |
F |
FOUR-BOLT HOLE CONSTRUCTION, INDUSTRIAL ROLLER BEARING PILLOW BLOCK. |
| . |
G |
LUBRICATION FITTING FOR AIRCRAFT ROLLER ROD END BEARING,*** |
| . |
G |
INDUSTRIAL BEARING THREADED COVER LOCKED BY SET SCREWS. |
| . |
H |
AIRCRAFT ROLLER BEARING EQUIPPED WITH BERYLLIUM COPPER RETAINERS, TFE-FIBER GLASS SEALS, AND REGULAR (MIL-G-2 3827) LUBRICANT, INTENDED FOR CONTINUOUS OPERATION AT 250??F OR INTERMITTENT OPERATION TO 300??F. |
| . |
H |
REVERSE ASSEMBLY FOR INDUSTRIAL ROLLER BEARING. |
| . |
L |
LEFT HAND THREADS, ROD END BEARINGS. |
| . |
M |
AIRCRAFT ROLLER BEARING ROD END EQUIPPED WITH TWO OR MORE GREASE FITTINGS (EXCEPTION MR-4AM) . |
| . |
N |
SPECIAL SLOTTING OF THREADED SHANK, AIRCRAFT ROLLER ROD END BEARING,*** |
| . |
P |
AIRCRAFT ROLLER BEARING WITH CONTACT SEALS,*** |
| . |
P |
PRECISION BORE INDUSTRIAL ROLLER BEARING |
| . |
PL |
PRECISION AND LAPPED INDUSTRIAL ROLLER BEARING. |
| . |
R |
REDUCED INTERNAL BEARING FIT, AIRCRAFT ROLLER BEARING |
| . |
R |
PRESS FIT OUTER RACE O.D. , INDUSTRIAL ROLLER BEARING. |
| . |
RB |
REDUCED INTERNAL FIT AND CLOSE BORE TOLERANCE, AIRCRAFT ROLLER BEARING, *** |
| . |
S |
MACHINE PILOT ON FACE OF INDUSTRIAL ROLLER BEARING FLANGE UNIT. |
| . |
S |
SINGLE-ROW INDUSTRIAL ROLLER BEARING, RADIAL THRUST,*** |
| . |
T |
DOUBLE-ROW AIRCRAFT ROLLER BEARING WITH A PRELOAD OF FROM 5 PERCENT -7 PERCENT OF RADIAL LIMIT LOAD RATING; SINGLE-ROW AIRCRAFT ROLLER BEARING WITH A PRELOAD OF 7 PERCENT - 10 PERCENT OF RADIAL LIMIT LOAD RATING. |
| . |
T |
WEDGE LOCK IN THREADED COVER, INDUSTRIAL ROLLER BEARING UNIT |
| . |
W |
INDUSTRIAL ROLLER BEARING WITH "WING TYPE" RETAINER,*** |
| . |
W |
FEMALE ROD END BEARING WITH NAS 513 KEY SLOT IN BOTTOM OF SHANK; MALE ROD END WITH NAS 513 KEYWAY IN FACE SIDE OF SHANK. |
| . |
X |
ROD END BEARINGS WITH THREADS ROLLED AFTER HEAT TREAT,*** |
| 10 |
. |
(FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, SLOT-LOADED, CHAMFERED OUTER RING. |
| 101 |
. |
(FRICTION PRODUCTS ONLY) JOURNAL BEARING, TFE-FABRIC LINED, PLAIN, STEEL OR ALUMINUM (CONFORMING TO MS21240) . |
| 102 |
. |
(FRICTION PRODUCTS ONLY) JOURNAL BEARING, TFE-FABRIC LINED, FLANGED, UNLINED FLANGE FACE, STEEL OR ALUMINUM. |
| 103 |
. |
(FRICTION PRODUCTS ONLY) JOURNAL BEARING, TFE-FABRIC LINED, FLANGED, LINED FABRIC FACE, STEEL OR ALUMINUM, (MS21241) . |
| 11 |
. |
(FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, NARROW, CHAMFERED OUTER RING. |
| 111 |
. |
(FRICTION PRODUCTS ONLY) JOURNAL BEARING, TFE-FABRIC LINED, SLEEVE IN BORE. |
| 12 |
. |
(FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, NARROW GROOVED OUTER RING. |
| 13 |
. |
(FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, WIDE, CHAMFERED OUTER RING. |
| 14 |
. |
(FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, WIDE > GROOVED OUTER RING. |
| 15 |
. |
(FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, HIGH MISALIGNMENT, CHAMFERED OUTER RING. |
| 16 |
. |
(FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, HIGH MISALIGNMENT, GROOVED OUTER RING. |
| 17 |
. |
(FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, BUSHED BORE, CHAMFERED OUTER RING. |
| 18 |
. |
(FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, BUSHED BORE, GROOVED OUTER RING. |
| 19 |
. |
(FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, SLOT-LOADED, GROOVED OUTER RING. |
| 31 |
. |
(FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, RIGHT HAND THREAD. |
| 32 |
. |
(FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, RIGHT HAND THREAD. |
| 33 |
. |
(FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, LEFT HAND THREAD. |
| 34 |
. |
(FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, LEFT HAND THREAD. |
| 35 |
. |
(FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, RIGHT HAND THREAD WITH KEYWAY. |
| 36 |
. |
(FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, RIGHT HAND THREAD WITH KEY SLOT. |
| 37 |
. |
(FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, LEFT HAND THREAD WITH KEYWAY. |
| 38 |
. |
(FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, LEFT HAND THREAD WITH KEY SLOT. |
| 41 |
. |
(FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, RIGHT HAND THREADS. |
| 42 |
. |
(FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, RIGHT HAND THREADS. |
| 43 |
. |
(FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, LEFT HAND THREADS. |
| 44 |
. |
(FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, LEFT HAND THREADS. |
| 45 |
. |
(FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, RIGHT HAND THREAD WITH KEYWAY. |
| 46 |
. |
(FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, RIGHT HAND THREAD WITH KEY SLOT. |
| 47 |
. |
(FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT , LEFT HAND THREAD WITH KEYWAY. |
| 48 |
. |
(FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, LEFT HAND THREAD WITH KEY SLOT. |
| 501 |
. |
(FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, PLAIN. |
| 502 |
. |
(FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, FLANGED, UNLINED FLANGE FACE. |
| 503 |
. |
(FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, FLANGED, LINED FLANGE FACE. |
| 504 |
. |
(FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC JLINED, SLEEVE IN BORE. |
| 506 |
. |
(FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION, FILAMENT WOUND, TFE-FABRIC LINED THREAD FORMS. |
| 601 |
. |
(FRICTION PRODUCTS ONLY) ANNULAR BEARING, TFE-FABRIC LINED, NARROW FILAMENT WOUND OUTER RING. |
| 602 |
. |
(FRICTION PRODUCTS ONLY) ANNULAR BEARING, TFE-FABRIC LINED, WIDE FILAMENT WOUND OUTER RING. |
| 603 |
. |
(FRICTION PRODUCTS ONLY) ANNULAR BEARING, TFE-FABRIC LINED, HIGH MISALIGNMENT, FILAMENT WOUND OUTER RING. |
| 604 |
. |
(FRICTION PRODUCTS ONLY) ANNULAR BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, SPECIAL CONFIGURATION . |
| 606 |
. |
(FRICTION PRODUCTS ONLY) MALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, THREADED ROD, LIGHT SERIES. |
| 607 |
. |
(FRICTION PRODUCTS ONLY) MALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, THREADED SHANK, HEAVY SERIES. |
| 608 |
. |
(FRICTION PRODUCTS ONLY) MALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, THREADED SHANK, HIGH MISALIGNMENT. |
| 609 |
. |
(FRICTION PRODUCTS ONLY) FEMALE ROD END BEARING, TFE-FABRIC LINED FILAMENT WOUND OUTER RING, LIGHT SERIES. |
| 610 |
. |
(FRICTION PRODUCTS ONLY) FEMALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, HEAVY SERIES. |
| 611 |
. |
(FRICTION PRODUCTS ONLY) ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, SPECIAL CONFIGURATION. |
| 701 |
. |
(FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, PLAIN, INDUSTRIAL APPLICATION |
| 702 |
. |
(FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, FLANGE, D, UNLINED FLANGED FACE, INDUSTRIAL APPLICATION. |
| 703 |
. |
(FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, FLANGED, LINED FLANGE FACE, INDUSTRIAL APPLICATION. |
| 704 |
. |
(FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, SLEEVE IN BORE, INDUSTRIAL APPLICATION. |
| 706 |
. |
(FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION, FILAMENT WOUND, TFE-FABRIC, LINED THREAD FORMS, INDUSTRIAL APPLICATION. |
| 801 |
. |
(FRICTION PRODUCTS ONLY) ANNULAR BEARING, TFE-FABRIC LINED, NARROW FILAMENT WOUND OUTER RING, INDUSTRIAL APPLICATION. |
| 802 |
. |
ANNULAR BEARING, TFE-FABRIC LINED, WIDE FILAMENT WOUND OUTER RING, INDUSTRIAL APPLICATION. |
| 803 |
. |
ANNULAR BEARING, TFE-FABRIC LINED, HIGH MISALIGNMENT, FILAMENT WOUND OUTER RING, INDUSTRIAL APPLICATION. |
| 804 |
. |
ANNULAR BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, SPECIAL CONFIGURATION, INDUSTRIAL APPLICATION. |
| 806 |
. |
MALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, THREADED ROD, LIGHT SERIES, INDUSTRIAL APPLICATION. |
| 807 |
. |
MALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, THREADED SHANK, HEAVY SERIES, INDUSTRIAL APPLICATION. |
| 808 |
. |
MALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, THREADED SHANK, HIGH MISALIGNMENT, INDUSTRIAL APPLICATION. |
| 809 |
. |
FEMALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, LIGHT SERIES, INDUSTRIAL APPLICATION. |
| 810 |
. |
FEMALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, HEAVY SERIES, INDUSTRIAL APPLICATION. |
| 811 |
. |
ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, SPECIAL CONFIGURATION, INDUSTRIAL APPLICATION. |
| 90 |
. |
(FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION PLAIN BUSHING. |
| 91 |
. |
(FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION SPHERICAL ANNULAR BEARING. |
| 92 |
. |
(FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION TWO PIECE SPHERICAL ROD END BEARING. |
| 93 |
. |
(FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION THREE PIECE SPHERICAL ROD END BEARING. |
| 94 |
. |
(FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION SPHERICAL BEARING. TEFLON FABRIC IN BORE. |
| 98 |
. |
(FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION, SPHERICAL BEARING, MISCELLANEOUS. |
| 99 |
. |
(FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION, SPHERICAL BEARING, LINK ASSEMBLY. |
| A |
. |
INDUSTRIAL ROLLER BEARING EQUIPPED WITH TWO OPEN AUXILIARY CAP SEALS (AS : AZA-) . |
| A |
. |
PILLOW BLOCK SERIES DESIGNATION.*** |
| A |
. |
DOUBLE-ROW AIRCRAFT BEARING, SELF-ALIGNING, REGULAR SERIES (NEW SERIES DAS) . |
| AB |
. |
DOUBLE-ROW AIRCRAFT BEARING, SELF-ALIGNING, REGULAR SERIES, WIDER SLEEVE (NEW SERIES DAS) . |
| AD |
. |
DOUBLE-ROW AIRCRAFT BEARING, SELF-ALIGNING, SIMILAR TO "C" SERIES EXCEPT METAL SEAL PLATES ONLY (NEW SERIES DAL) . |
| AE |
. |
DOUBLE-ROW AIRCRAFT BEARING, SELF-ALIGNING,*** (NEW SERIESI-DAS) . |
| AEF |
. |
DOUBLE-ROW AIRCRAFT BEARING, SELF-ALIGNING, TWO FELT CONTACT SEALS*** (USE NEW DAS SERIES) . |
| AF |
. |
MODIFICATION OF DOUBLE-ROW AIRCRAFT BEARINGS "A", "AB", AND "AD" SERIES*** (USE NEW DAS SERIES) . |
| AP |
. |
AIRCRAFT DOUBLE-ROW BEARING, INTERCHANGEABLE WITH AN207DP BALL BEARING. |
| AR |
. |
SINGLE-ROW FEMALE THREAD AIRCRAFT ROD END, (ARA PREFIX, ONE BEARING ONLY) (NEW SERIES SF) . |
| ARE |
. |
AIRCRAFT ROD END BEARING, SINGLE-ROW, SELF-ALIGNING, TWO SHIELDS, FEMALE THREADS,*** (USE SF SERIES) . |
| ATE |
. |
AIRCRAFT ROD END BEARING, SINGLE-ROW, SELF-ALIGNING, TWO SHIELDS, MALE THREADS,*** (USE SM SERIES). |
| ATFA |
. |
ANNULAR BEARING, TFE-FABRIC LINED, ALUMINUM, NARROW OUTER RING. |
| ATFA-100 |
. |
ANNULAR BEARING, TFE-FABRIC LINED, ALUMINUM, WIDE OUTER RING. |
| ATGA |
. |
ANNULAR BEARING, TFE-FABRIC LINED, ALUMINUM, NARROW GROOVED OUTER RING. |
| ATGA-100 |
. |
ANNULAR BEARING, TFE-FABRIC LINED, ALUMINUM, WIDE GROOVED OUTER RING. |
| B |
. |
INDUSTRIAL ROLLER BEARING FLANGE UNIT,***. |
| B |
. |
INDUSTRIAL ROLLER BEARING EQUIPPED WITH ONE OPEN AND ONE CLOSED AUXILIARY CAP SEAL (AS: BZA-) . |
| B |
. |
SINGLE-ROW AIRCRAFT BEARING (NEW SERIES SA) . |
| BP |
. |
SINGLE-ROW AIRCRAFT BEARING, CYLINDRICAL O.D., INTERCHANGEABLE FOR AN-200-KP AND KS BALL BEARINGS, DOUBLE-ROW SLEEVE TYPE (NEW SERIES SA) . |
| BR |
. |
DOUBLE-ROW AIRCRAFT BEARING, SELF-ALIGNING, TWO SHIELDS AND BUNA-"N" SEALS, SLEEVED INNER RING (NEW SERIES DAS). |
| C |
. |
INDUSTRIAL ROLLER BEARING TAKEUP UNIT,*** |
| C |
. |
DOUBLE-ROW AIRCRAFT ROLLER BEARING, SELF-ALIGNING, ONE PIECE INNER RACE FITTED WITH POSITIVE SEALS (NEW SERIES DA) . |
| D |
. |
DOUBLE-ROW INDUSTRIAL ROLLER BEARING, RADIAL THRUST BEARING,*** |
| DA |
. |
NEW SERIES AIRCRAFT DOUBLE-ROW ANNULAR BEARING WITH NO SLEEVES OR COLLARS. |
| DA |
. |
INDUSTRIAL BEARING DUPLEX UNIT,*** |
| DAC |
. |
NEW SERIES DOUBLE-ROW AIRCRAFT ANNULAR BEARING WITH COLLARS ONLY. |
| DAL |
. |
NEW SERIES DOUBLE-ROW AIRCRAFT ANNULAR BEARING WITH NO SLEEVES OR COLLARS (SEAL GROOVE FLAT - LAND) . |
| DAS |
. |
NEW SERIES DOUBLE-ROW AIRCRAFT ANNULAR BEARING WITH SLEEVES AND COLLARS. |
| DAT |
. |
NEW SERIES DOUBLE-ROW AIRCRAFT ANNULAR BEARING, TORQUE TUBE TYPE. |
| DDR |
. |
NEW SERIES DOUBLE-ROW DOUBLE EYE AIRCRAFT LINK BEARING. |
| DE |
. |
DOUBLE-ROW INDUSTRIAL ROLLER BEARING, SELF-ALIGNING, NON-SEPARABLE,*** |
| DE |
T |
DOUBLE-ROW SELF-ALIGNING INDUSTRIAL ROLLER BEARING, TAPERED BORE,*** |
| DF |
. |
NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, FEMALE ROD END WITH HEX BOTTOM (OR WRENCH FLAT) . |
| DFP |
. |
NEW SERIES DOUBLE-ROW AIRCRAFT BEARING, FEMALE ROD END WITH PLAIN BOTTOM. |
| DL |
. |
INDUSTRIAL BEARING DUPLEX UNIT,*** |
| DM |
. |
NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, MALE ROD AND THREADED. |
| DMD |
. |
NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, MALE THREADED "D" HEAD ROD END. |
| DMH |
. |
NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, MALE THREADED ROD END, HOLLOW SHANK. |
| DP |
. |
SPECIAL DOUBLE-ROW AIRCRAFT ROLLER BEARING WITH BUNA-"N" SEALS (NEW SERIES DAT) . |
| DPH |
. |
NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, PLAIN HOLLOW SHANK. |
| DPS |
. |
NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, MALE ROD END PLAIN SHANK, SOLID |
| DR |
. |
INDUSTRIAL ROLLER BEARING DUPLEX UNIT. |
| DRX |
. |
NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, SPECIAL CONFIGURATION. |
| DS |
. |
SPECIAL DOUBLE-ROW AIRCRAFT ROLLER BEARING WITH STAINLESS STEEL SHIELDS ONLY,*** |
| DT |
. |
DOUBLE-ROW AIRCRAFT BEARING, STRAIGHT ROLLER (TORQUE TUBE BEARING),*** (NEW SERIES DAT) . |
| DT |
A |
SUPERSEDES "DT" SERIES, PROVIDED WITH POSITIVE ALIGNMENT STOP (NEW SERIES DAT) . |
| E |
. |
INDUSTRIAL ROLLER BEARING DUPLEX UNIT,*** |
| FA |
. |
INDUSTRIAL ROLLER BEARING FLANGE UNIT,*** |
| FC |
. |
INDUSTRIAL ROLLER BEARING OUTBOARD FLANGE UNIT,*** |
| FR |
. |
AIRCRAFT ROLLER, BEARING, ROD END, SINGLE-ROW, FEMALE THREADS (NEW SERIES SF) . |
| FS |
. |
INDUSTRIAL ROLLER BEARING FLANGE HOUSING UNIT,*** |
| HR |
. |
AIRCRAFT ROLLER BEARING, SINGLE-ROW, HOLLOW SHANK ROD END (NO THREAD) (NEW SERIES SPH) . |
| L |
. |
INDUSTRIAL ROLLER BEARING CARTRIDGE UNIT,*** |
| MA |
. |
AIRCRAFT ROLLER BEARING, SINGLE-ROW, SPECIAL 2 DEGREE ALIGNMENT ROD END (AM-6 ONLY MODEL FOR LOCKHEED) . |
| ML |
. |
INDUSTRIAL ROLLER BEARING CARTRIDGE UNIT,*** |
| ML |
. |
LOCK-NUT DESIGNATION, USED ON INDUSTRIAL ROLLER BEARINGS. |
| MR |
. |
AIRCRAFT ROLLER BEARING, SINGLE-ROW ROD END, MALE THREAD (NEW SERIES SM) . |
| MRE |
. |
AIRCRAFT ROLLER BEARING***, SINGLE-ROW, SELF-ALIGNING, MALE THREAD ROD END, *** (REPLACED BY SM SERIES) . |
| MRX |
. |
NEW SERIES MULTIPLE ROW ROLLER BEARING, SPECIAL CONFIGURATION. |
| MS |
. |
INDUSTRIAL ROLLER BEARING CARTRIDGE UNIT,*** |
| MW |
. |
INDUSTRIAL ROLLER BEARING CARTRIDGE UNIT,*** |
| N |
. |
INDUSTRIAL BEARING LOCK-NUT |
| PA |
. |
INDUSTRIAL ROLLER BEARING PILLOW BLOCK,*** |
| PAC |
. |
INDUSTRIAL ROLLER BEARING PEDESTAL TYPE PILLOW BLOCK,*** |
| PAF |
. |
INDUSTRIAL ROLLER BEARING PEDESTAL TYPE PILLOW BLOCK,*** |
| PL |
. |
INDUSTRIAL ROLLER BEARING PILLOW BLOCK,*** |
| PR |
. |
AIRCRAFT ROLLER BEARING, SINGLE-ROW, PLAIN SOLID SHANK ROD END (NO THREADS) ,*** (USE SPS SERIES) . |
| RF |
. |
AIRCRAFT ROLLER BEARING, SINGLE-ROW, FEMALE ROD END USING AR-3 ROD END EYE ONLY, (NEW SERIES SF) . |
| S |
. |
3- INCH DIAMETER CONVEYOR ROLLS SERIES,*** |
| SA |
. |
NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, ANNULAR WITH NO SLEEVES AND COLLARS. |
| SAL |
. |
NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, ANNULAR WITH NO SLEEVES AND COLLARS, WITH SEAL GROOVE FLAT. |
| SAT |
. |
NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, ANNULAR, TORQUE TUBE TYPE. |
| SC |
. |
2-1/4 INCH DIAMETER CONVEYOR ROLLS SERIES.*** |
| SD |
. |
4 INCH DIAMETER CONVEYOR ROLLS SERIES,*** |
| SDR |
. |
NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, DOUBLE EYE LINK BEARING. |
| SE |
. |
5-INCH DIAMETER, CONVEYOR ROLL SERIES,*** |
| SF |
. |
6-INCH DIAMETER CONVEYOR ROLL SERIES,*** |
| SF |
. |
NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, FEMALE THREADED ROD END WITH HEX BOTTOM (OR WRENCH FLAT) . |
| SFP |
. |
NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, FEMALE THREADED ROD END WITH PLAIN BOTTOM. |
| SM |
. |
NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, MALE THREADED ROD END. |
| SMD |
. |
NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, MALE THREADED "D" HEAD ROD END. |
| SMH |
. |
NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, MALE THREADED ROD END, HOLLOW SHANK. |
| SPH |
. |
NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, ROD END, PLAIN HOLLOW SHANK. |
| SPS |
. |
NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, ROD END, PLAIN SHANK, SOLID . |
| SRX |
. |
NEW SERIES, SINGLE-ROW AIRCRAFT ROLLER BEARING, SPECIAL CONFIGURATION. |
| ST |
. |
AIRCRAFT ROLLER BEARING, SINGLE-ROW MALE THREADED ROD END (NEW SERIES SM) |
| SV |
. |
AIRCRAFT ROLLER BEARING, SINGLE-ROW, FEMALE THREADED ROD END, NO GREASE FITTINGS . |
| TFA |
. |
ANNULAR BEARING, TFE-FABRIC LINED, STEEL, NARROW OUTER RING. |
| TFA-100 |
. |
ANNULAR BEARING, TFE-FABRIC LINED, STEEL, WIDE OUTER RING. |
| TFA-200 |
. |
ANNULAR BEARING, TFE-FABRIC LINED, STEEL, HIGH MISALIGNMENT. |
| TFF |
. |
FEMALE ROD END BEARING, TFE-FABRIC LINED, LIGHT DUTY |
| TFF-400 |
. |
FEMALE ROD END BEARING, TFE-FABRIC LINED, PER MIL-B-8948. |
| TFM |
. |
MALE ROD END BEARING, TFE-FABRIC LINED, LIGHT DUTY. |
| TFM-200 |
. |
MALE ROD END BEARING, TFE-FABRIC LINED, HIGH MISALIGNMENT. |
| TFM-400 |
. |
MALE ROD END BEARING, TFE-FABRIC LINED, PER MIL-B-8948. |
| TGA |
. |
ANNULAR BEARING, TFE-FABRIC LINED, STEEL, NARROW GROOVED OUTER RING. |
| TGA-100 |
. |
ANNULAR BEARING, TFE-FABRIC LINED, STEEL, WIDE GROOVED OUTER RING. |
| TGA-200 |
. |
ANNULAR BEARING, TFE-FABRIC LINED, STEEL, HIGH MISALIGNMENT, GROOVED OUTER RING. |
| TL |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP,*** |
| TR |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP,*** |
| W |
. |
INDUSTRIAL ROLLER BEARING LOCK WASHER |
| XC |
A |
SPLIT TYPE INDUSTRIAL ROLLER BEARING PILLOW BLOCK ADAPTER MOUNTING, DOUBLE-ROW TAPERED BORE,*** |
| YD |
. |
AIRCRAFT ROLLER BEARING, DOUBLE-ROW, SPECIAL SERIES |
| YS |
. |
AIRCRAFT ROLLER BEARING, SINGLE-ROW SPECIAL SERIES |
| YTA |
. |
ANNULAR BEARING, TFE-FABRIC LINED, SPECIAL SERIES |
| YTD |
. |
TFE-FABRIC LINED BEARING, SPECIAL CONFIGURATION |
| YTF |
. |
FEMALE ROD END BEARING, TFE-FABRIC LINED, SPECIAL SERIES |
| YTM |
. |
MALE ROD END BEARING, TFE-FABRIC LINED, SPECIAL SERIES |
| ZA |
. |
DIRECT MOUNTED SELF-ALIGNING ROLLER BEARING PILLOW BLOCK, DOUBLE-ROW BEARING. |
| ZAT |
. |
FRAME ONLY FOR INDUSTRIAL ROLLER BEARING TAKE-UP UNIT. |
| ZAT-2000 |
. |
NORMAL DUTY INDUSTRIAL ROLLER BEARING TAKE-UP UNIT WITH FRAME. |
| ZB |
. |
DIRECT MOUNTED SELF-ALIGNING ROLLER BEARING FLANGE HOUSING UNIT, NORMAL DUTY, DOUBLE-ROW. |
| ZBR |
. |
DIRECT MOUNTED SELF-ALIGNING ROLLER BEARING FLANGE CARTRIDGE UNIT, NORMAL DUTY, DOUBLE-ROW. |
| ZBT |
. |
DIRECT MOUNTED SELF-ALIGNING ROLLER BEARING FLANGE CARTRIDGE UNIT, HEAVY DUTY, DOUBLE-ROW. |
| ZC |
. |
DIRECT MOUNTED SELF-ALIGNING ROLLER BEARING TAKE-UP UNIT, DOUBLE-ROW, *** (SEE ZT-2000 SERIES) . |
| ZD |
. |
INDUSTRIAL ROLLER BEARING HEAVY DUTY DUPLEX UNIT, SELF-ALIGNING, SEALS IN END PLATE, WITH SHIMS FOR ADJUSTING BEARING (SEE ZD-5000 SERIES). |
| ZD-2000 |
. |
INDUSTRIAL ROLLER BEARING NORMAL DUTY DUPLEX UNIT, SELF-ALIGNING, WITH SEALS AND SHIMS. |
| ZD-5000 |
. |
HEAVY DUTY INDUSTRIAL ROLLER BEARING DUPLEX UNIT, SELF-ALIGNING, WITH SEALS AND SHINS. |
| ZE |
. |
NORMAL DUTY INDUSTRIAL ROLLER BEARING DUPLEX UNIT, SELF-ALIGNING, WITH SEALS AND SHIMS. |
| ZES |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP UNIT, HEAVY DUTY, BOOT END,*** (SEE ZET-5000 SERIES) . |
| ZET |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP FRAME ONLY. |
| ZET-5000 |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP UNIT AND FRAME ASSEMBLY, BOOT END. |
| ZF |
. |
DIRECT MOUNTED SELF-ALIGNING INDUSTRIAL ROLLER BEARING FLANGE HOUSING UNIT, HEAVY DUTY, DOUBLE-ROW. |
| ZFA |
. |
INDUSTRIAL ROLLER BEARING .FLANGE BLOCK, ADAPTER SERIES. |
| ZFB |
. |
INDUSTRIAL ROLLER BEARING EXPANSION FLANGE BLOCK, ADAPTER SERIES. |
| ZFS |
. |
INDUSTRIAL ROLLER BEARING EXPANSION FLANGE BLOCK, HEAVY DUTY. |
| ZGS |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP UNIT, HEAVY DUTY, HEAD END. |
| ZGT |
. |
TAKE-UP FRAME ONLY FOR INDUSTRIAL ROLLER BEARING TAKE-UP. |
| ZGT-5000 |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP UNIT AND FRAME ASSEMBLY, HEAD END. |
| ZHT |
. |
TAKE-UP FRAME ONLY FOR INDUSTRIAL ROLLER BEARING TAKE-UP, CENTER PULL TYPE. |
| ZHT-2000 |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP UNIT AND FRAME ASSEMBLY, NORMAL DUTY. |
| ZHT-5000 |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP UNIT AND FRAME ASSEMBLY, HEAVY DUTY. |
| ZHTL |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP UNIT, EXTRA HEAVY DUTY, LEFT HAND,*** |
| ZL |
. |
INDUSTRIAL ROLLER BEARING DIRECT MOUNTED SELF-ALIGNING CARTRIDGE UNIT, NORMAL DUTY, DOUBLE-ROW. |
| ZM |
. |
INDUSTRIAL ROLLER BEARING CARTRIDGE UNIT, HEAVY DUTY, LARGE O.D. |
| ZMA |
. |
INDUSTRIAL ROLLER BEARING CARTRIDGE, ADAPTER SERIES. |
| ZMB |
. |
INDUSTRIAL ROLLER BEARING EXPANSION CARTRIDGE, ADAPTER SERIES. |
| ZMC |
. |
INDUSTRIAL ROLLER BEARING EXPANSION CARTRIDGE, SPECIAL,*** |
| ZMF |
. |
INDUSTRIAL ROLLER BEARING CARTRIDGE, SPECIAL,*** |
| ZMR |
. |
INDUSTRIAL ROLLER BEARING CARTRIDGE, SPECIAL,*** |
| ZMV |
. |
INDUSTRIAL ROLLER BEARING CARTRIDGE, SPECIAL,*** |
| ZMW |
. |
INDUSTRIAL ROLLER BEARING CARTRIDGE UNIT, HEAVY DUTY |
| ZMX |
. |
INDUSTRIAL ROLLER BEARING EXPANSION CARTRIDGE, HEAVY DUTY. |
| ZMY |
. |
INDUSTRIAL ROLLER BEARING CARTRIDGE, SPECIAL. |
| ZN |
. |
INDUSTRIAL ROLLER BEARING HANGER BOX,*** |
| ZN-2000 |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP UNIT, NORMAL DUTY. |
| ZN-5000 |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP UNIT, HEAVY DUTY. |
| ZNT |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP FRAME ONLY. |
| ZNT-2000 |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP UNIT WITH FRAME ASSEMBLY NORMAL DUTY. |
| ZNT-5000 |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP UNIT WITH FRAME ASSEMBLY, HEAVY DUTY. |
| ZP |
. |
DIRECT MOUNTED INDUSTRIAL ROLLER BEARING PILLOW BLOCK, HEAVY DUTY, DOUBLE-ROW, FIXED TYPE. |
| ZPA |
. |
ADAPTER MOUNTED SELF-ALIGNING ROLLER BEARING PILLOW-BLOCK, DOUBLE-ROW, FIXED TYPE. |
| ZPB |
. |
ADAPTER MOUNTED SELF-ALIGNING ROLLER BEARING PILLOW-BLOCK, EXPANSION (FLOATING) TYPE, DOUBLE-ROW. |
| ZPC |
. |
INDUSTRIAL ROLLER BEARING PILLOW BLOCK, HEAVY DUTY (PEDESTAL TYPE),*** |
| ZRT |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP UNIT, HEAVY DUTY,*** (SEE ZN-5000 SERIES) . |
| ZST |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP UNIT AND FRAME,*** |
| ZT |
. |
DIRECT MOUNTED SELF-ALIGNING ROLLER BEARING TAKE-UP UNIT, HEAVY DUTY, DOUBLE -ROW,*** |
| ZT-2000 |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP BLOCK ONLY, NORMAL DUTY. |
| ZT-5000 |
. |
INDUSTRIAL ROLLER BEARING TAKE-UP BLOCK ONLY, HEAVY DUTY. |
Bearing >Bearing Numbers > Rexnord bearings